SP4-xxx Scanner
4918
Manual Gamma DFU
Adjusts the offset data of printer gamma for yellow in Photo mode.
4961
Original Adjustment
1 Synchro-cut Adjustment 210mm
Adjusts the synchro-cut position.
[-9.9 to +9.9/0.0/0.1 mm ]
Use the 210-mm position in the sample to check the difference. This setting is
used to calculate the motor clock count for adjusting the difference.
2 Synchro-cut Adjustment 1000mm
Adjusts the synchro-cut position.
[-9.9 to +9.9/0.0/0.1 mm step]
Use the 1000-mm position in the sample to check the difference. This setting is
used to calculate the motor clock count for adjusting the difference.
3 Original Length Display
Displays the original length.
D093/D094
2-102
SM Appendix