Corona Wire Cleaning Interval; Test Pattern - Ricoh D093 Service Manual

Main SP Modes
2804

Corona Wire Cleaning Interval

Sets the interval for charge corona wire cleaning.
Note: The wire is cleaned only when the hot roller temperature is below 50 °C
o
(122 F).
[0 to 6/3/1 step]
0: None (no cleaning)
1: After the main switch is turned on.
2: After 300 m of copies
3: After 600 m of copies
4: After 900 m of copies
5: After 1200 m of copies
6: After 1500 m of copies
2902

Test Pattern

Use these SP's to select and print test patterns. Select one of 25 available test
patterns (1-25).
[0 to 25/0/1]
0: None (default)
0: None
1: 1-dot Grid Pattern
2: 2-dot Grid Pattern
3: 3-dot Grid Pattern
4: 4-dot Grid Pattern
5: 5-dot Grid Pattern
6: 6-dot Grid Pattern
7: 1-dot Argyle Pattern
8: 2-dot Argyle Pattern
9: 3-dot Argyle Pattern
D093/D094
13: 1-dot Vertical Line
14: 2-dot Vertical Line
15: 1-dot Horizontal Line
16: 2-dot Horizontal Line
17: Checkered Flag
18: 1-dot Alternating Dot Pattern
19: 2-dot Alternating Dot Pattern
20: 4-dot Alternating Dot Pattern
21: Trimming Area
22: Full Dot Pattern
6-26 SM