Led Adjustment Normally Dfu - Ricoh D093 Service Manual

SP4-xxx Scanner
4763

LED Adjustment Normally DFU

Displays LAMPR OFF setting of the CIS1 analog ASIC (LM98714) after RGB
white level adjustment when the machine is powered on. The peak value for
standard white plate reading (the shading data peak value) is set to 880 +-20
digits by Red white level adjustment. The adjusted value is used as the default
setting for the white level adjustment done for Red when the machine is powered
on.
[23 to 523 / 304 / 1]
1 CIS 1 R
2 CIS 2 R
3 CIS 3 R
4 CIS 4 R
5 CIS 5 R
6 CIS 1 G
7 CIS 2 G
8 CIS 3 G
9 CIS 4 G
10 CIS 5 G
11 CIS 1 B
12 CIS 2 B
13 CIS 3 B
14 CIS 4 B
15 CIS 5 B
D093/D094 2-94 SM Appendix