Main SP Modes
209 Instl Clear
Releases a machine from its embedded RCG setup.
250 CommLog Print
Prints the communication log.
5821
Remote Service Address
This SP sets the IP address for RCG (Remote Communication Gate) for
processing calls to the @Remote service center.
NVRAM Data Upload
Uploads the UP and SP mode data (except for counters and the serial
number) from NVRAM on the control board to an SD card inserted in Slot 2.
5824
Remove the SD card slot cover on the back of the machine.
Insert a blank SD card in Slot 2.
Open this SP and touch [EXECUTE].
When you see "Completed", remove the SD card from Slot 2.
NVRAM Data Download
Downloads the content of an SD card in Slot 2 to the NVRAM on the control
board.
5825
Remove the SD card slot cover on the back of the machine.
Insert a blank SD card in Slot 2.
Open this SP and touch [EXECUTE].
When you see "Completed", remove the SD card from Slot 2.
D093/D094
-2397
Incorrect ID2 format
-2398
Incorrect request number format
CTL
6-74
CTL
CTL
SM