Used Toner Bottle Motor - Ricoh D093 Service Manual

5.8.4 USED TONER BOTTLE MOTOR

Preparation
You will need a stubby driver for this procedure.
PSU ( p.5-87 "Circuit Breaker/PSU")
Toner collection bottle (
T&S power pack (
Removal of the fusing unit is recommended.
1. Loosen screw [A] (
2. Remove screw [B] (
3. Disconnect motor and slide it out of the machine [C] (
4. Motor [D] ( x1,
SM
p.5-46 "Used Toner Collection Bottle, Toner Overflow Sensor")
p.5-95 "T&S Power Pack")
x1).
x1)
x 2)
5-81
x 1).
Motors
D093/D094