Ce Login; Charge Counter Method Japan Only; Limitless Switch - Ricoh D093 Service Manual

5169

CE Login

This SP enables and disables the CE log in mode. With this SP enabled, the
machine is in the CE (Customer Engineer/Service Technician) login mode.
In the CE login mode:
The machine power can be turned off and on in the SP mode, and it will
remain in the SP mode after power is restored.
This SP is automatically reset to "0" (disabled) after the service technician
closes the SP mode with the [Exit] soft button or after the log out timer
expires.
Note: The Auto Logout Timer is in the "System Settings" of UserTools.
[0 to 1/0/1]
0: Disable, 1: Enable
0: CE login mode disabled.
1: CE login mode enabled.
5180

Charge Counter Method Japan Only

This SP codes sets the charge counter method.
[0 to 1/0/1]
0: Count number of sheets by paper size
1: Count frequency by paper size
5195

Limitless Switch

This SP selects the paper feed mode by switching between "productivity
priority" (0) and "tray priority (1). This SP operates only if the operator has
selected "Auto Paper Select".
[0 to 1 / 0 / 1]
0: Productivity priority. Switches from the current feed tray to the priority tray as
soon as the machine detects the priority tray, even if paper still remains in the
current feed tray.
1: Tray priority. Switches the feed tray only after the paper in the tray current
tray runs out of paper.
SM
CTL
6-49
Main SP Modes
CTL
CTL
D093/D094