Table of Contents
Advertisement
Installation
Before doing the procedure, turn off the main power switch and unplug the machine
from its power source.
1.
Remove the cover [1] of Slot A (
2.
Insert the LAN board [2] into Slot A (
3.
Use a clean cloth moistened with alcohol to clean where clamp [1] will be attached.
4.
Attach clamp [1] (
5.
Set the cables [2] in the notch clamps as shown.
6.
Make sure the cables are arranged as shown and not twisted.
SM
x 2).
x 2).
x1).
3-83
Installation of MFP Options
D093/D094
Advertisement
Table of Contents
Troubleshooting
