Table of Contents
Advertisement
Preparation
3.1.5 INSTALLATION OVERVIEW
Installation Flow
The machine can be installed on either a roll feeder or a table.
Roll feeder. You can install a roll feeder with one roll or two rolls. You can also install a
universal paper cassette inside the roll feeder. You cannot install the paper cassette without
the roll feeder.
Table. Used as an alternative to the roll feeder, it contains only the lower stacker.
Here is a summary of the sequence recommended for installation of all options at installation.
Installation Flow Diagram
Machine Pre-Installation
Remove the machine from its box. Remove all packing material and tape. Put the
machine on the roll feeder or the table.
Roll Feeder (or Table) Installation
Install Paper Cassette
SP and User Tool Settings for Installation
Do all the SP and User Tool settings for the machine and the installed options.
Machine Final Installation
Complete the installation of the machine after you put it on the roll feeder or table, and
after you install all options. Do some sample copies to check the operation of the
machine and the installed options.
MFP Options, Other Options
Install the MFP options and any other options, such as the USB2.0/SD Slot Type E
(D354).
D093/D094
3-4
SM
Advertisement
Table of Contents
Troubleshooting
