Table (B854)
Attaching the Stopper Brackets
This stopper bracket is only for machines in North America that use inch paper sizes.
1.
Remove the stoppers [1] (
2.
Use a clean cloth soaked in alcohol to clean the surfaces [2] where the stopper brackets [3]
will be attached.
3.
Remove the double-sided tape [4] from the rear of each bracket.
4.
Install each bracket and stopper on the arms.
5.
Lock each stopper in the correct position (
D093/D094
x 2 ea.).
x 2 ea.).
3-60
SM