Paper Thickness Default Selection - Ricoh D093 Service Manual

2.2.1 PAPER THICKNESS DEFAULT SELECTION

Several SP codes in these tables reference the "Paper Thickness Default Selection".
The paper thickness is selected on the operation panel before each copy job. The
default settings can selected with the User Tools.
To display the panel shown above:
[User Tools]> "System Settings"> "Tray Paper Settings"> "Next"> "Paper Thickness: Paper
Tray" or "Paper Thickness: Paper Bypass.
These settings are used to change the fusing temperature and amount of pressure applied
by the pressure roller on the hot roller.
Each numbered button (1 to 5) represents a "mode" (Mode 1 to Mode 5). These references
to "modes" are used in several SP codes below.
The modes for thicker paper are to the left of the "3" button and those for thinner paper to
the right of the "3" button.
Touching a button on the right raises the fusing temperature and pressure applied by the
pressure roller on thicker paper. Touching a button on the left lowers the temperature and
lowers the pressure for thinner paper.
These settings can be done independently for paper fed from either the paper cassette or
the bypass tray.
SM Appendix 2-17
SP1-xxx Feed
D093/D094