Stamp Data Download; Remote Rom Update; Smtp/Pop3/Imap4; Smtp Auth. From Field Replacement - Ricoh D093 Service Manual

Main SP Modes
5853

Stamp Data Download

Push [Execute] to download the fixed stamp data from the machine ROM onto
the hard disk so that these stamps can be used by the system. The customer will
not be able to use these stamps ("Confidential", "Secret", etc.) until this SP has
been executed.
Note:
This SP must always be executed after the HDD has been reformatted or
replaced.
Always switch the machine off and on after executing this SP.
5856

Remote ROM Update

When set to "1" allows reception of firmware data via the local port (IEEE
1284) during a remote ROM update. This setting is reset to zero after the
machine is cycled off and on.
[0 to 1 / 0 / 1]
0: Not allowed
1: Allowed
5860

SMTP/POP3/IMAP4

MDN Response RFC2298Compliance
Determines whether RFC2298 compliance is switched on for MDN reply mail.
21
[0 to 1/1/1]
0: No
1: Yes

SMTP Auth. From Field Replacement

Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
22
[0 to 1/0/1]
0: No. "From" item not switched.
1: Yes. "From" item switched.
D093/D094 6-90
CTL
CTL
CTL
SM