Paper Exit Unit - Ricoh D093 Service Manual

Common Procedures

5.1.4 PAPER EXIT UNIT

1. Remove the rear cover and controller cover (
Cover")
2. Disconnect the ground wire [A] and connector [B] on the left (
3. Disconnect the ground wire [C] on the right (
4. Open the paper exit unit [A] and cover.
5. Raise the paper exit unit approximately 30° from horizontal, and pull the unit away from the
left and right hinges [B] and [C].
D093/D094
x 2). ( p.5-3 "Rear Cover, Controller
x 1, x 1).
5-4
x 2, x 1, x 1).
SM