Setting The Main Machine On The Table; Installation Procedure - Ricoh D093 Service Manual

3.6.2 INSTALLATION PROCEDURE

Confirm that the machine is switched off and that the power cord is disconnected from
the power source before doing this procedure.

Setting the Main Machine on the Table

The main machine weighs 107 kg (235 lb.).
There are two handles in recesses on each side of the main machine. To prevent injury
or damage to the main machine, always use these handles [1] to lift the main machine.
Two or more service technicians are necessary to lift the main machine and set it on
the table.
1. Lift the main machine, and set its rubber feet [2] into the holes [3] on the top of the table [4].
With one person at each end of the main machine, use the two handles on each
end of the main machine to lift it.
2. Make sure that you put the rubber feet of the main machine into the holes on top of the
table.
SM 3-55
Table (B854)
D093/D094