Pnp Model Name; Pnp Serial Number; Notify Unsupport - Ricoh D093 Service Manual

6 PnP Model Name

This SP sets the model name to be used by the USB PnP when "Function
Enable (Level 2) is set so the USB Serial No. can have a common name
(SP5844-5).
Default: Laser Printer (up to 20 characters allowed).

7 PnP Serial Number

This SP sets the serial number to be used by the USB PnP when "Function
Enable (Level 2) is set so the USB Serial No. can have a common name
(SP5844-5).
Default: None (up to 12 characters allowed for entry).
Make sure that this entry is the same as the serial number in use.
At initialization the serial number generated from the model name is used,
not the setting of this SP code.
At times other than initialization, the value set for this SP code is used.

100 Notify Unsupport

This SP determines whether an alert message appears on the control panel
when a a USB device (unsupported device) that cannot use an A-connector is
connected.
[0 to 1/1/1]
0: Function enable
1: Function disable
An unsupported device is a device that cannot use the functions of the USB
device. For example, a USB mouse cannot be used even if it connected.
If the PictBridge option is not mounted, even if a digital camera is connected
it cannot be used because it is an unsupported device.
SM 6-81
Main SP Modes
D093/D094