All Addr Info Switch; Stand-By Doc Max Number; Channel Min/Max - Ricoh D093 Service Manual

SP5-xxx Mode

141 All Addr Info Switch

Switch this SP off if the system is performing slowly due to a large number of
resources in use. If this SP is switched off, only 2000 documents can be queued
for sending to the Capture Server. (See SP5836-142 below.)
[0 to 1 / 1 /1]
0: Off
1: On

142 Stand-by Doc Max Number

This SP sets the maximum number of documents to be held on stand-by before
they are sent to the Capture Server. However, the maximum number (10,000)
cannot be set unless SP5386-141 has been disabled (switched off).
[10 to 10000 / 2000 / 1]
5840 IEEE 802.11
Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth
6
setting varies for different countries.
[1 to 14/14/1]
Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN. This
7
bandwidth setting varies for different countries.
[1 to 14/1/1]
Transmission Speed
0 x FF to Auto [Default]
0 x 11 – 55M Fix
0 x 10 – 48M Fix
8
0 x 0F – 36M Fix
0 x 0E – 18M Fix
0 x 0D – 12M Fix
0 x 0B – 9M Fix
D093/D094
0 x 0A – 6M Fix
0 x 07 – 11M Fix
0 x 05 – 5.5M Fix
0 x 08 – 1M Fix
0 x 13 – 0 x FE (reserved)
0 x 12 – 72M (reserved)
0 x 09 – 22M (reserved)
2-160
CTL
SM Appendix