Long Print: Graphic; Long Print: Mode Setting - Ricoh D093 Service Manual

6 Long Print: Graphic

The machine switches to the Long Print mode (fixed toner supply mode) for any
original longer than 1189 mm (46.8 in.).
There are two Long Print modes (Long Print/Drawing and Long Print
Graphic).
If the operator is frequently running jobs that contain either a lot of lines or
graphics then SP2208-7 (Long Print Mode Setting) should be set
accordingly.
The values set for this SP are reflected in the printed images after Long
Print/Graphic has been selected.
[1 to 40 / 6 / 1%]

7 Long Print: Mode Setting

The machine switches to the Long Print mode (fixed toner supply mode) for any
original longer than 1189 mm (46.8 in.).
[0 to 1/0/1]
*0: Drawing
1: Graphic
This SP can be set for the graphic or line mode, depending on which type of
job is most frequently required for printing.
For a Long Print mode job the setting of SP2208-5 is reflected when the
operator selects graphic mode, and the setting of SP2208-6 is reflected
when the operator selects line mode.
SM 6-19
Main SP Modes
D093/D094