Folder Auth Change - Ricoh D093 Service Manual

Folder Auth Change

This SP determines whether the user login information (Login User name and
Password) or address (destination setting in the address book for Scan-to-SMB)
is used to permit folder access. The machine must be cycled off/on for this
21
setting to take effect if it is changed.
[0 to 1 / 0 / 1]
0: Uses operator login information (initial value of main machine)
1: Uses address authorization information
Addr Book Migration (SD -> HDD)
This SP moves the address book data from an SD card to the HDD. You must
turn the machine power off and on after executing this SP.
1. Turn the machine off.
2. Install the HDD.
3. Insert the SD card with the address book data in SD card Slot C3.
4. Turn the machine on.
5. Do SP5846-40.
6. Turn the machine off.
40
7. Remove the SD card from SD card Slot C3.
8. Turn the machine on.
Notes:
Executing this SP overwrites any address book data already on the HDD
with the data from the SD card.
We recommend that you back up all directory information to an SD card with
SP5846-51 before you execute this SP.
After the address book data is copied to HDD, all the address book data is
deleted from the source SD card. If the operation fails, the data is not erased
from the SD card.
SM Appendix 2-169
SP5-xxx Mode
D093/D094