Transfer Corona, Separation Corona Wires; Disassembling The Transfer Unit - Ricoh D093 Service Manual

Around the Drum

5.3.5 TRANSFER CORONA, SEPARATION CORONA WIRES

1. Open the upper unit.
2. Side covers ( p.5-2 "Side Covers")
3. Transfer unit [A] (
Reinstallation
At each end of the unit, make sure that the tabs [B] are fully engaged with the studs [C].
When the tabs are engaged correctly, the caps on the end are fully level.

Disassembling the Transfer Unit

1. Left cap [A] ( x1)
2. Right cap [B] ( x1)
D093/D094
x 2, x 2)
5-38 SM