Sc400; Id Sensor Auto Adjustment Error; Id Sensor Vsg Error - Ricoh D093 Service Manual

7.3.4 SC400

Group 4 SC codes are also related to image making.
400 D

ID Sensor Auto Adjustment Error

Vsg did not reach 4 ±0.2 V when the ID sensor was initialized with
SP3001-2.
ID sensor dirty
ID sensor harness, connector loose, disconnected, damaged, defective
ID sensor defective
MCU defective
Development unit defective
CGB power pack defective
401 D

ID Sensor Vsg Error

The Vsg level was twice detected lower than 2.5 V.
-or-
The Vsg level was once detected higher than 4.8V.
ID sensor dirty
ID sensor harness, connector loose, disconnected, damaged, defective
ID sensor defective
MCU defective
CGB power pack defective
SM 7-19
Service Call Tables
D093/D094