Reso: Copy (Mono); Reso: Print (Mono); Reso: Scan (Color); Reso: Scan (Mono) - Ricoh D093 Service Manual

122 Reso: Copy(Mono)
Actually the specified resolution setting cannot be changed through hardware
control, so in such a case an approximate resolution is used for the capture.
[0 to 255 / 3 / 1]
124 Reso: Print(Mono)
Normally this address is specified remotely for IO registration of the monochrome
resolution for documents on the Capture Server. Actually the specified resolution
setting cannot be changed through hardware control, so in such a case an
approximate resolution is used for the capture.
[0 to 255 / 3 / 1]

127 Reso: Scan (Color)

This SP sets the image resolution for a captured image of a color original scanned
with the scanner application.
Normally this address is specified remotely for IO registration of the Capture
Server, but it can be changed on the machine operation panel.
Actually the specified resolution setting cannot be changed through hardware
control, so in such a case an approximate resolution is used for the capture.
[0 to 255 / 4 / 1]

128 Reso: Scan (Mono)

This sets the image resolution for a captured image of a monochrome original
scanned with the scanner application.
Normally this address is specified remotely for IO registration of the Capture
Server, but it can be changed on the machine operation panel.
Actually the specified resolution setting cannot be changed through hardware
control, so in such a case an approximate resolution is used for the capture.
[0 to 255 / 3 / 1]
SM Appendix 2-159
SP5-xxx Mode
D093/D094