Controller Functions; Paper Source Selection; Tray Priority (Auto Tray Select); Manual Tray Select - Ricoh Aficio 1013 Service Manual

CONTROLLER FUNCTIONS

4.2 CONTROLLER FUNCTIONS

4.2.1 PAPER SOURCE SELECTION

Tray Priority (Auto Tray Select)

The controller searches for the specified paper size, starting from Tray 1, and uses
the first tray that has the specified paper size. If the selected tray is pulled out or
runs out of paper during printing, the controller searches for another tray with the
specific paper size and if found, automatically switches to it. If the controller cannot
find another paper tray with the specified paper size, printing stops and the LCD
displays the message "Load Paper".
The Tray Priority setting can be specified with a user tool.
(User Tools/Printer features/Job Control/Paper Input/Tray Priority)
NOTE: The by-pass tray is not part of the tray search.

Manual Tray Select

When the printer driver specifies a tray, the selected tray becomes the first tray
checked at the start of the tray search. If the selected tray does not have the size of
paper specified by the driver, the controller searches the other trays for the same
paper size.
NOTE: Tray Priority in the Job Control menu does not specify the start of the tray
search, but specifies the paper size in the selected tray as the default
paper size.
B441
Start of Tray Search
Start of Tray Search
(Tray selected by
the driver)
Tray 1
Tray 2
B441D510.WMF
Tray 1
Tray 2
B441D511.WMF
4-2 SM