Download  Print this page

Three-party Conference; Splitting A Conference Call Into Two Separate Calls; Mute - Panasonic KX-TGP600 User Manual

For 8x8 pbx service.
Hide thumbs


Panasonic DECT KX-TGP600 User Guide

Three-party Conference

During a conversation, you can add an additional party to your call and establish a conference call .
Note: Your phone system may support advanced conference features, such as conference calls with four or more parties . In this case, the
procedures for handling a conference call may be different from those explained in this section . For details, contact your phone system
dealer/service provider .
Making a Conference Call
1 .
/[FUNC]/[FUNCTION] during a conversation . → "Conference"
2 . Dial the party you want to add to the conversation . →
3 .
Ending a Conference Call
To go on-hook and end the conference call,
KX-TPA60: press
KX-TPA65: On-hook

Splitting a Conference Call into Two Separate Calls

1 . During a 3 way conference press [HOLD] . This puts both parties on hold
2 . Press the LINE key and Select one of the Two Calls on Hold . This connects you one caller, the other remains on hold
3 . Press [HOLD] to put that call on hold and talk to the second caller
4 . Press [HOLD] again to alternate Between the two callers


You can disable the microphone or the handset to consult privately with others in the room while listening to the other party on the phone
through the speaker or the handset .
To set/cancel
Note: When If the LCD is blinking
displayed on the 1st line of the
• During Mute, even if you switch from/to speakerphone, Mute will continue .
• During Mute, even if you connect/disconnect a headset, Mute will continue .
• When using a KX-TPA65,
., Mute is on . soft key
/[MUTE] can also be used .
is not displayed on the LCD,
/MUTE is


Table of Contents

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: