Preparing Cables; Connecting A Network Interface Cable - MUTOH ValueJet VJ-1638UH Operation Manual

3 Before using
3.8.3

Preparing cables

The printer is equipped with a network interface for connecting with a PC.
You need a network interface cable to connect a PC with this printer.
Prepare the cable depending on the PC that it will be connected to.
TIP
•About connecting a network interface cable, refer to "
•For the recommended cable specifications, refer to "
3.8.4

Connecting a network interface cable

This section explains how to connect a network interface cable.
Follow the procedure below to connect this printer to your PC.
1. Turn OFF both the printer and PC.
2. Insert the connector of the network interface cable into the network interface connector located in
the back of the printer.
No.
1
2
3. Connect the other connector of the network interface cable to your PC.
TIP
About connecting to your PC, refer to the operation manual included with the PC.
178
3.8.4 Connecting a network interface cable
8.1.2 System configurations
Network interface cable
Network interface cable connector
VJ-1638UH OPERATION MANUAL
Name
3.8 Connecting the printer to PC
".
".
1 2