Connecting A Network Interface Cable - MUTOH ValueJet VJ-1204 Quick Reference

3.6.3

Connecting a network interface cable

This section explains how to connect a network interface cable.
Follow the procedure below to connect this printer to your PC.
1. Turn OFF both the printer and PC.
2. Insert the network interface cable into the network interface connector located in the back of the
printer.
No.
1
2
3. Fix the network interface cable to the cable clamp.
No.
1
2
4. Connect the other connector of the network interface cable to your PC.
TIP
• About connecting to your PC, refer to the operation manual included with the PC.
• For network setting on the side of the printer, refer to "3.8.2 Panel setup menu
overview".
3 Basic usage
Network interface cable
Network interface cable connector
Network interface cable
Cable clamp
2
1
Name
2
1
Name
VJ-1204 QUICK REFERENCE
3-21