Oracle Solaris Os Configuration Parameters - Sun Oracle Netra SPARC T3-1 Installation Manual

Oracle Solaris OS Configuration
Parameters
You must provide these parameters during initial Oracle Solaris OS configuration.
Parameter
Language
Locale
Terminal Type
Network?
Multiple Network
Interfaces
DHCP?
Host Name
IP Address
Subnet?
Subnet Netmask
IPv6?
Security Policy
Confirm
Name Service
NFSv4 Domain Name
Time Zone (Continent)
Time Zone (Country or
Region)
82 Netra SPARC T3-1 Server Installation Guide • August 2013
Description
Select a number from the displayed language list.
Select a number from the displayed locale list.
Select a terminal type that corresponds with your terminal device.
Select Yes.
Select the network interfaces that you plan to configure. If you are not sure, select
the first one in the list.
Select Yes or No according to your network environment.
Type the host name for the server.
Type the IP address for this Ethernet interface.
Select Yes or No according to your network environment.
(If subnet was Yes) Type the netmask for the subnet for your network
environment.
Specify whether or not to use IPv6. If you are not sure, select No to configure the
Ethernet interface for IPv4.
Select either standard UNIX security (No) or Kerberos Security (Yes). If you are not
sure, select No.
Review the onscreen information and change it if needed. Otherwise, continue.
Select the name service according to your network environment.
Note – If you select a name service other than None, you will be prompted for
additional name service configuration information.
Select the type of domain name configuration according to your environment. If
you are not sure, select Use the NFSv4 domain derived by the server.
Select your continent.
Select your country or region.