Assembling And Connecting Dc Power Cords; Assemble The Dc Input Power Cables - Sun Oracle Netra SPARC T3-1 Installation Manual

Assembling and Connecting DC
Power Cords
These topics provide the power requirements for the DC-powered version of the
server, as well as instructions on how to assemble and connect DC power cords to the
server.
Description
Review requirements for the DC power
source, chassis ground, the DC connectors,
and the overcurrent protection.

Assemble the DC input power cables.

Connect the DC input power cables to the
server.
Related Information
"Electrical Specifications" on page 6
■
"Prepare the Power Cords" on page 70
■
▼ Assemble the DC Input Power Cables
The following procedure describes how to assemble the DC input power cables.
Assemble one cable for each DC power supply in your server.
Before you begin the installation procedure, verify that the required conditions
described in the following table have been satisfied.
Link
"Electrical Specifications" on page 6
"DC Power Source, Power Connection, and
Grounding Requirements" on page 8
"Input Power Information" on page 7
"Overcurrent Protection Requirements" on
page 8
"Assemble the DC Input Power Cables" on
page 71
"Connect the DC Input Power Cords to the
Server" on page 74
71