Sun Oracle Netra SPARC T3-1 Installation Manual page 51

Caution – The server is heavy. Two people are required to lift and mount the server
into a rack enclosure when following these procedures.
Caution – You must install the server into a rack following these instructions. If you
deviate from these instructions when installing the server, your installation will not
be supported.
Description
Install the server using a 23-inch
2-post rackmount kit.
Install the server using a 19-inch
2-post rackmount kit.
Install the server using a 19-inch
2-post sliding rail rackmount kit.
Related Information
"Mounting the Server Into a 4-Post Rack" on page 22
■
"Preparing for Installation" on page 1
■
Links
"23-Inch, 2-Post Hardmount Rackmount Kit" on
page 44
"Install the Server (23-Inch, 2-Post Hardmount
Rackmount Kit)" on page 45
"19-Inch, 2-Post Hardmount Rackmount Kit" on
page 50
"Install the Server (19-Inch, 2-Post Hardmount
Rackmount Kit)" on page 51
"19-Inch, 2-Post Rack Sliding Rail Rackmount Kit"
on page 56
"Install a Server (19-Inch, 2-Post Sliding Rail
Rackmount Kit)" on page 57
Installing the Server 43