Stabilize The Rack For Installation - Sun Oracle Netra SPARC T3-1 Installation Manual

Caution – Circuit Overloading. Do not overload the power supply circuits. Before
connecting the server to the supply circuit, review the equipment nameplate power
ratings and consider the effect that circuit overloading might have on overcurrent
protection and supply wiring.
Caution – Reliable Grounding. Maintain reliable grounding of rackmounted
equipment. Give particular attention to supply connections other than direct
connections to the branch circuit (for example, use of power strips).
Caution – Do not use slide rail mounted equipment as a shelf or a work space.
Related Information
"Stabilize the Rack for Installation" on page 21
■

▼ Stabilize the Rack for Installation

Caution – To reduce the risk of personal injury, stabilize the expansion rack cabinet
and extend all antitilt devices before installing the server.
Refer to your rack documentation for detailed instructions for the following steps.
1. Open and remove the front and rear doors from the rack cabinet.
2. To prevent the rack cabinet from tipping during the installation, stabilize the
cabinet using all antitilt mechanisms provided.
3. If there are leveling feet beneath the rack cabinet to prevent it from rolling,
extend these leveling feet fully downward to the floor.
4. Fully extend the rack cabinet's antitilt legs or antitilt bar, which are located at
the bottom front of the rack cabinet.
Related Information
"Rack Cautions" on page 20
■
Documentation for your rack cabinet
■
Installing the Server 21