Sun Oracle Netra SPARC T3-1 Installation Manual page 34

6. Using two screws per side, secure the front of the hardmount brackets attached
to the sides of the server to the front of the rack.
7. Get the two rear mount flanges from the rackmount kit.
8. Using two screws for each rear mount support bracket, secure the rear mount
support brackets to the rear of the rack.
Related Information
"Stabilize the Rack for Installation" on page 21
■
"19-Inch, 4-Post Hardmount Rackmount Kit" on page 23
■
26 Netra SPARC T3-1 Server Installation Guide • August 2013