Sun Oracle Netra SPARC T3-1 Installation Manual page 80

Prerequisite Condition
Install a DC power source that meets the server's input power
specifications.
Secure DC power cables that meet the server's power cabling
specifications.
Attach the DC input plug to the DC input power cables. The input plug
is provided in the server's shipping kit.
1. Turn off power from the DC power source using the circuit breakers.
Caution – Before proceeding with these instructions, turn off the power from the DC
power source through the circuit breakers.
2. Identify the parts that you will use to assemble the DC input power cables.
For each cable, you need a DC input plug, cage clamp tool, or small screwdriver.
These items are provided in the shipping kit that came with your server (DC
models only).
3. Locate the three wires coming from your DC power source that will be used in
the connection to your unit:
■
■
■
72 Netra SPARC T3-1 Server Installation Guide • August 2013
-48V or -60V (negative terminal)
Chassis ground
-48V or -60V Return (positive terminal)
Responsible Party
Customer
Customer
Customer