Assigning A Static Ip Address To The Service Processor; Log In To The Service Processor (Ser Mgt Port) - Sun Oracle Netra SPARC T3-1 Installation Manual

Time Zone
Date and Time
root Password
Related Information
"Back Panel Connectors and Ports" on page 66
■
"Assigning a Static IP Address to the Service Processor" on page 83
■
Netra SPARC T3-1 Server Administration Guide
■
Assigning a Static IP Address to the
Service Processor
If your network does not use DHCP, the network management port is not operational
until you configure network settings for the service processor.
This topic includes the following tasks:
"Log In to the Service Processor (SER MGT Port)" on page 83
■
"Assign a Static IP to the NET MGT Port" on page 85
■
Related Information
"Power On Task Overview" on page 77
■
"Oracle ILOM System Console Overview" on page 78
■
"Oracle Solaris OS Configuration Parameters" on page 82
■

▼ Log In to the Service Processor (SER MGT Port)

After the service processor boots, access the ILOM CLI to configure and manage the
server. The ILOM CLI prompt (->) is displayed at the first time the service processor
is booted. The default configuration provides an ILOM CLI root user account. The
default root password is changeme. Change the password using the service
processor ILOM CLI password command.
Select the time zone.
Accept the default date and time or change the values.
Type the root password twice. This password is for the superuser account for the
Oracle Solaris OS on this server. This password is not the SP password.
Powering On the Server for the First Time 83