Reports; Section Three Special Function - Notifier AM2020 User Manual

The Special Function feature of the AM2020/AFP1010 allows the operator to generate AM2020/AFP1010
status reports or view the AM2020/AFP1010 History File.

Reports

Enter 1 for a System Configuration report, 2 for an Installed Point report, 3 for a Fire Alarm report, 4 for a
Trouble report, 5 for a Disable report, 6 for a Monitor Module On report (including non-fire and security
monitor modules), or 7 for a Control Module On report.
The display will show:
Only one report can be conducted at any one time. The reports are not displayed on the DIA.
Reports are either displayed on the CRT and/or printed by the printer depending on whether or not
printer reports are redirected to the CRT during programming. An example of a report
2-18
www.PDF-Zoo.com
Section Three
Special Function
S
Press
SPL
FUNCT
PRESS@1=RPTS,2=HIS
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@:
PRESS@1=SYS,2=POINT,3=ALM,4=TBL,5=DIS,
6=MONON,7=CTLON@@@@@@@@@@@@@@@@@@@@@:
PRESS 1=REQUEST,2=ABORT
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@:
Enter 1 to execute the report or 2 to abort a report already in progress.
printout is illustrated in Figure 3-1.
The display will show:
NOTE
SPL FUNCT
Menu Option 1
Operating 15088: J 10/22/99