Component Placement; Cabinet Size Information; Component Placement Guidelines - Notifier AM2020 User Manual

Each component in the system has a specific mounting position in the cabinet. Mount any optional APS-6R
power supplies and amplifiers in CHS-4/4L chassis positions A through D as required. It is recommended that the
CHS-4/4L chassis always be installed in the lowest cabinet row available (refer to Table 2.4-1).
Optional component placement guidelines are provided in Figure 2.4-1.
NIB-96 (Power-limited) Mounts in any one LIB position
or any two CHS-4/4L positions.
CCM-1 (Power-limited) Mounts in any one LIB position
or any two CHS-4/4L positions.
1-18
www.PDF-Zoo.com
C C
ABINET ABINET
M R
ODELS OWS
C A B A - 3 1
C A B B - 3 2
C A B C - 3 3
C A B D - 3 4
UZC-256 (Power-limited) Mounts in any one LIB position or
any two CHS-4/4L positions.
NAM-232 (Power-limited) Mounts in either the left or right
position of a CHS-4 by using four PEM studs on the
CHS-4 chassis.
Installation 15088:J 10/22/99