Field Wiring An Aps-6R; Cover Installation; Mounting The Aps-6R To A Chassis; Typical Aps-6R Wiring - Notifier AM2020 User Manual

Field Wiring an APS-6R

Figure 3.6-3 shows typical field wiring for an APS-6R
Before field wiring, install
the APS-6R plastic cover,
and install the press-fit
terminal block cover over
TB1 when field wiring is
complete (Figure 3.6-2).
1-48
www.PDF-Zoo.com
WARNING:
Use extreme caution when working with the APS-6R - high voltage
and AC line-connected circuits are present in the APS-6R. Turn off
and remove all power sources. To reduce the risk of electric shock
make sure to properly ground the APS-6R.
J1 and J2 may be used in place of TB2 when
the APS-6R is powering internal modules
(such as the UZC-256, XPC-8) with
compatible connectors
Installation 15088:J 10/22/99