System History Event Log; Printing Reports; Extracting The History Log - Notifier Inertia 1010 Operator's Manual

1010/2020 O M
PERATORS ANUAL
S H
YSTEM ISTORY
The panel has the option to store a history buffer of the last 400 events on the system. These
events can then be displayed or printed in event order or grouped in reports. If this feature
has been enabled, it can be accessed as follows.
To enter system history menu
press the "Special Function" key
once.
The following screen will then appear.
PRESS
P R
RINTING EPORTS
Select 1= RPT from special functions menu.
The following screen will then appear.
1= SYS, 2=POINT, 3=ALM, 4=FLTS, 5=ISO, 6=MONON,
7=CTLON
1= SYS,
2= POINT,
3= ALM,
4= FLTS,
5= ISO,
6= MONON,
7= CTLON,
Select desired option and then press ENTER, the screen will than ask:
PRESS 1= REQUEST, 2= ABORT,
The report will then be sent directly to the system printer.
Note: If you do not have a system printer, a laptop computer can be used in terminal mode to
receive the information.
E T H
XTRACTING HE ISTORY
Select 2=HIS from special functions menu.
The following screen will now appear.
PRESS 1=PRINT, 2=DISPLAY, 3=STEP, 4=RANGE/STATUS
E L
VENT OG
FUNCT
1= RPT 2= HIS
Total system report
Full device report
All devices in alarm report
All devices in fault report
All isolated devices report
All monitor modules active report
All control modules active report
L
OG
C © 2000, N
OPYRIGHT
SPL
I P L
OTIFIER NERTIA TY TD
P 13
AGE