Compatibility List; Em-Abs-01 For Acu; Module Firmware 1.0.1.0; Module-Firmware 2.0.1.0 - BONFIGLIOLI Active Cube User Manual

10.2

Compatibility list

The compatibility between Module Firmware and device Firmware is described in the following.
ACU EM-ABS-01 Firmware
Firmware
5.0.x Invalid Combination
5.1.x Invalid Combination
5.2.0 Possible combination
5.3.0 Invalid Combination
The ACU Firmware can be read out via
016.
EM Software version
10.2.1

Module Firmware 1.0.1.0

The Module Firmware 1.0.1.0 requires basic device Firmware 5.2.0.
The following encoders are supported:
•
•
•
Limitations:
•
Note:
10.2.2

Module-Firmware 2.0.1.0

The Module Firmware 2.0.1.0 requires basic device Firmware 5.3.0.
The following encoders are supported:
•
•
•
•
Note:
124
EM-ABS-01 Firmware
1.0.1.0
Invalid Combination
Invalid Combination
Invalid Combination
Possible combination
Inverter Software Version
SinCos
Hiperface
EnDat 2.1 (with SinCos tracks)
In basic device firmware 5.2.0 several parameters of this operating instruc-
tions are not included.
An operation of modules with firmware 1.0.1.0 is only valid with devices
with firmware 5.2.0.
Devices with deviating device firmware may only be operated with EM-
ABS-01 modules firmware 1.0.1.0 after written confirmation through Bon-
figlioli.
SinCos
Hiperface
EnDat 2.1 (with SinCos tracks)
SSI
An operation of modules with firmware 2.0.1.0 is only valid with devices
with firmware 5.3.0.
Devices with deviating device firmware may only be operated with EM-
ABS-01 modules firmware 2.0.1.0 after written confirmation through Bon-
figlioli.

EM-ABS-01 for ACU

2.0.1.0
012 and the Module Firmware via
03/12