Supply Voltage - BONFIGLIOLI Active Cube User Manual

8.4.4 Supply voltage

Via parameter
power supply.
The SinCos encoder can be powered as follows:
via control terminals X410A.5 (5 ... 12 VDC) and X410A.7 (GND) or
−
via contacts X412.6 (V
−
The parameter setting is effective on the terminals and the contact of the female HD-
Sub-D connector.
Caution! Note the encoder manufacturer's supply voltage specifications. Non-
Caution! Always set the
No.
1187 Supply voltage
03/12
1187 , you can select the voltage level for encoder
Supply voltage
) and X412.15 (0VL) of the female HD-Sub-D connector.
Enc
compliance may damage the encoder.
Supply voltage
1186 . Otherwise, the encoder might be destroyed by high voltage
supply
levels.
Parameters
Description
EM-ABS-01 for ACU
1187 first and then set
Settings
Min. Max.
5.0 V 12.0 V
Power
Factory set-
ting
5.0 V
101