Account Code Entry; System Feature Descriptions - Samsung DS 616 User Manual

4.1 SYSTEM FEATURE DESCRIPTIONS

ACCOUNT CODE ENTRY

Station users may enter an account code (maximum 12 digits) before hanging up
from a call. This account code will appear in the SMDR printout for that call record.
Keyset users may enter this code using an account (ACCT) key without interrupting
a conversation. Single line telephone users must temporarily interrupt the call by
hook-flashing and dialing the feature access code. Account codes can be up to 12
digits long.
FORCED
When forced, they are always verified from a system list of 200 entries. Account
codes are always printed on the SMDR report. They can contain digits 0–9.
VOLUNTARY
Users may elect to enter an account code for any call. When a user voluntarily dials
an account code it is only verified from the system list of 500 entries when the ACCT
key is pressed before the call is made. If the ACCT key is pressed during a call the
account number is not verified. They can include digits 0–9, star (✱) and #.
ALL CALL VOICE PAGE
Users can page all internal and all external paging zones at the same time by
dialing the All Page code. Keysets may be restricted from making or receiving
pages in system programming. A maximum of 12 keysets can be programmed to
receive page announcements.
ATTENTION TONE
To get your attention, a brief tone precedes all page announcements and intercom
voice calls. There are separate programmable duration timers for page and voice
announce tones.
AUTHORIZATION CODES
Authorization codes are used to give permission to make a call. These four digit
authorization codes can be either forced or voluntary. When used, authorization
codes will automatically change the dialing station's class of service to the level
assigned to the authorization code. Authorization codes may be programmed to
print or not print on SMDR.
FORCED
When a station is programmed for forced authorization, the user must always enter
this code before dialing is allowed. The dialed authorization code is verified from a
system list of 30 entries.
4.2