Assign Speed Dialling Blocks - Samsung DCS-816 System Administration And Special Features Manual

SAMSUNG
DCS-816
selected
4. Dial the speed dial location (e.g., 05)
OR use UP or DOWN to scroll through the location
numbers and use the right soft key to move the cursor
OR press the left soft key to return to step 2
5. Enter the name using the procedure in 3.4 Program
Station Names
If you make an error, press HOLD to clear an entire entry
or use the DOWN key to step back one character
6. Press the F key to access 3.9 Program Personal
Speed Dial Numbers For Other Stations
OR press the left soft key to return to step 4
OR press the right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program

3.11 ASSIGN SPEED DIALLING BLOCKS

Your system can have up to 500 speed dial entries assigned (50 blocks of 10 numbers
each). Up to 200 of these (20 blocks) can be allocated as system speed dials, and the re-
mainder allocated to keysets as personal speed dials. Consequently, the more system
speed dials that are allocated, the fewer speed dials are available for personal use.
When assigning speed dials, this MMC displays the number of system or personal blocks
that are currently assigned and also shows the number remaining to be assigned, called
the 'Free List'. This program also allows you to delete blocks of speed dial if required.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
Open customer programming and follow the instructions below.
Used to scroll through options.
Used to enter selections.
Move cursor left and right.
Used to store data and advance to next program.
Used to clear previous entry.
3 - 10
System Administration and Special Features Guide
[205] SPEED NAME
01 : _
[205] SPEED NAME
01 : SAM SMITH
[MMC 606]
March 1999