Caller Id Integration With Voice Mail; Second Call Caller Id (Extension Level Call Waiting Caller Id); Third Party Caller Id Check; Caller Id Display Separator - NEC DS1000 Product Description

Station Message Detail Recording
05/07/1999 09:10P
---+---+--------------------------------+----------+---------+--------+---
Sta|Lin|
---+---+--------------------------------+----------+---------+--------+---
301| 02|
301| 02|
301| 02|
301| 02|

Caller ID Integration with Voice Mail

Caller ID fully integrates with NVM-Series Voice Mail systems. This enables Voice Mail features
such as Make Call with Caller ID. Make Call allows the Voice Mail subscriber to return a call to
someone who left them a message without knowing the calling party's phone number.

Second Call Caller ID (Extension Level Call Waiting Caller ID)

While a display keyset user is busy on a call, the system can show the Caller ID information for a
waiting call. If the busy extension is programmed to receive Camp On tones or Off-Hook Ringing
from the waiting call, the system will send the Caller ID data to the busy telephone's display. If the
busy extension does not receive Camp On tones or Off-Hook Ringing, it will also not receive the
waiting call's Caller ID. (Note that Caller ID data from a Camp On is displayed only once, corre-
sponding to the single Camp On beep.)

Third Party Caller ID Check

Third Party Caller ID Check allows a keyset user to display the Caller ID data for another trunk.
The trunk that the user checks can be ringing or busy.

Caller ID Display Separator

An extension's display can optionally show a calling party number separator. The separator is a
dash after the area code and after the local exchange on a 7 or 10 digit number.

Hardware Requirements

In DS2000, Caller ID requires the installation of Caller ID Daughter Boards on your ATRU PCBs:
In DS1000, Caller ID is built-in and requires the installation of no additional equipment.
Feature Quick Steps
To cancel the Caller ID display and return your phone to its normal display:
1.
To turn the Caller ID display back on (after you press CLEAR to cancel it):
1.
To display the Caller ID data for the third party's call (i.e., use Third Party Caller ID Check):
1.
2.
DS1000/2000 Product Description
Number Dialed
ANDERSON ALLEN|
Private Number|
Out of Area Number|
4ATRU PCB P/N 80010A uses Caller ID Daughter Board P/N 92012.
8ATRU PCB P/N 80011A uses Caller ID Daughter Board P/N 80013.
The 4ATRU and 8ATRU PCBs must use firmware 1.5 or higher.
Press CLEAR .
Press CHECK .
Press ICM + CHECK .
Press the key for the call you want to check.
You can press a line key, loop key, Hotline key or Call Coverage key:
Section 3: Features
| Account |
2139261000| |11:11:39A|00:01:13|IN
|11:11:39A|00:01:13|IN
|09:12:13P|00:01:12|IN
|09:12:07P|00:01:20|IN
Start |Duration| T
Section 3: Features
3
33