Maintenance Procedures; Air Cleaner - HYOSUNG MS3 250 Sercie Manual

2-5 PERIODIC MAINTENANCE

MAINTENANCE PROCEDURES

This section describes the servicing procedures for
each item mentioned in the Periodic Maintenance
chart.

AIR CLEANER

Inspect Interval
Clean Every 3,000 km,
Replace Every 12,000 km.
If the air cleaner is clogged with dust, intake resis-
tance will be increased, with a resultant decrease in
power output and an increase in fuel consumption.
Check and clean the air cleaner element in the fol-
lowing manner :
● Position the motorcycle on the center stand.
● Lift and support the side cover with the side cover
stay. (Refer to page 2-2)
● Unscrew and remove the eight screws ① .
● Remove the air cleaner case cover ② .
● Take off the air cleaner element ③ .
● Fill a washing pan of a proper size with a non-
flammable cleaning solvent �. Immerse the air
cleaner element in the cleaning solvent and wash
it.
● Gently squeeze the air cleaner element between
the palms of both hands to remove the excess sol-
vent : do not twist or wring the element or it will
develop tears.
● Immerse the element in HYOSUNG genuine oil
�, and then squeeze out the excess oil leaving
the element slightly wet.
● Reinstall the cleaned or new air cleaner element
in the reverse order of removal.
①
�
�
③
②