HYOSUNG MS3 250 Sercie Manual page 81

● Install the crankshaft ①
CAUTION
Never strike the crankshaft with a plastic hammer
when inserting it into the crankcase.
It will be easy to install the crankshaft to left
crankcase.
◉ ◉ CRANKCASE
● Install the crank balancer ② .
(Only for
● Clean and degrease the crankcase mating sur-
faces (both surfaces) with a cleaning solvent.
● Fit the dowel pins ③
● Apply BOND "1215" to the right crankcase.
BOND "1215"
CAUTION
� � Coat the sealant evenly without break.
� � Application of sealant must be performed with-
in a short period of time.
� � Take extreme care not to let sealant enter into
the oil hole or bearing.
● Assemble the crankcases with in few minutes.
● Tighten the crankcase bolts diagonally and evenly.
Crankcase bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
NOTE
After crankcase bolts have been tightened, check
it crankshaft rotate smoothly.
into the left crankcase half.
)
into the left crankcase.
③
ENGINE 3-38
①
②
③