Starter Motor - HYOSUNG MS3 250 Sercie Manual

● Install the fixed drive face ① .
● Install the washer ②
CAUTION
Check that the fixed drive face is not fouled with
grease or other substance and if found, clean and
degrease completely.
Check that the parts are properly engaged with
the spline.
● Tighten the fixed drive face nut ③
torque.
Fixed drive face nut
● To obtain proper contact of the drive V-belt ④ ,
turn the fixed drive face ①
face and the movable driven face ⑤
synchronously.
◉ ◉ CLUTCH COVER
● Install the dowel pins and gasket.
● Install the clutch cover ⑥ .
● Tighten the clutch cover bolts to the specified
torque.
Clutch cover bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
◉ ◉ STARTER MOTOR
● Install the starter motor ⑦
⑧ .
and fixed drive face nut ③ .
to the specified
: 50 N∙ ∙ m (5.0 kgf∙ ∙ m)
until the fixed drive
can rotate
and the oil return tank
②
③
①
⑥
⑧
ENGINE 3-52
④
⑤
⑦