8-33 CHASSIS
● Remove the rear suspension arm ①
axle nut ② .
◉ ◉ INSPECTION
WHEEL : Refer to page 8-11
WHEEL BEARING : Refer to page 8-12
TIRE : Refer to page 2-23
◉ ◉ REMOUNTING
Remount the rear wheel in the reverse order of
removal.
Pay attention to the following points :
● Install the rear wheel and tighten the rear axle nut
②
to the specified torque.
Rear axle nut
: 100 ~ 140 N∙ ∙ m (10.0 ~ 14.0 kgf∙ ∙ m)
● Tighten the rear suspension arm bolts ③
specified torque.
Rear suspension arm bolt
: 25 ~ 35 N∙ ∙ m (2.5 ~ 3.5 kgf∙ ∙ m)
and the rear
to the
②
②
①
③