Removal - HYOSUNG MS3 250 Sercie Manual

5-7 FUEL SYSTEM AND THROTTLE BODY

REMOVAL

● Lift and support the side cover with the side cover
stay. (Refer to page 2-2)
● Remove the all coupler to related the throttle
body.
● Loosen the clamp screw ① .
● Disconnect the throttle cable ② .
CAUTION
After disconnecting the throttle cable, do not
snap the throttle valve from full open to full close.
If may cause damage to the throttle valve and
throttle body.
● Disconnect the fuel injector hose ③
hose ④ .
● Loosen the intake pipe bolt ⑤ .
● Remove the throttle body assembly ⑥ .
● Remove the insulator ⑦
and breather
and O-ring.
①
②
④
⑤
③
⑦
⑥