Table of Contents
Advertisement
▣ ▣ SIDE COVER STAY
inside the side cover.
Use the "Side cover stay" to inspect the engine or the
other parts easily.
◆ USE OF SIDE COVER STAY
● Position the motorcycle on the center stand.
● Raise the seat.
● Remove the two bolts ①
● Remove the two bolts ②
● Push the side cover for the rear side.
CAUTION
Proceed with care.
Do not damage the cover, reflector and lamp.
Handle plastic and paint-finished parts with care
to avoid scratching or damage.
● Disconnect the tail lamp coupler.
● Lift the front end of the side cover and prop it up
as shown side.
Insert the crank end of the side cover stay ③
the hole of the side cover.
CAUTION
Upon reassembly, install the bolts and cover cor-
rectly in the appropriate seats.
have the "Side cover stay"
in the personal trunk.
of the rear carrier.
①
②
into
PERIODIC MAINTENANCE 2-2
③
Advertisement
Chapters
Table of Contents
Troubleshooting
