HYOSUNG MS3 250 Sercie Manual page 217

◉ ◉ INSPECTION
Inspect the rear shock absorber for damage and oil
leakage. If any defects are found, replace the rear
shock absorber with a new one.
CAUTION
Do not attempt to disassemble the rear shock
absorber. It is unserviceable.
◉ ◉ REMOUNTING
● Install the rear shock absorber and tighten the
bolts and nuts to the specified torque.
Shock absorber mounting bolt (upper)
: 40 ~ 50 N∙ ∙ m (4.0 ~ 5.0 kgf∙ ∙ m)
Shock absorber mounting bolt (lower)
: 25 ~ 35 N∙ ∙ m (2.5 ~ 3.5 kgf∙ ∙ m)
CHASSIS 8-38