Brake System - HYOSUNG MS3 250 Sercie Manual

BRAKE SYSTEM

Inspect Interval
[ BRAKE ]
Inspect Initial 1,000 km and Every 4,000 km thereafter.
[ BRAKE HOSES & BRAKE FLUID ]
Inspect Initial 1,000 km and Every 4,000 km thereafter.
Replace the brake hoses Every 4 years,
Replace the brake fluid Every 2 years.
▣ ▣ BRAKE FLUID LEVEL CHECK
● Keep the motorcycle upright and place the handle-
bars straight.
● Check the brake fluid level by observing the lower
limit line (LOWER) on the front and rear brake
fluid reservoir.
● When the level is below the lower limit line
(LOWER), replenish with brake fluid that meets
the following specification.
Specification and Classification : DOT 4
WARNING
The brake system of these motorcycles are filled
with a glycol-based brake fluid. Do not use or mix
different types of fluid such as silicone-based or
petroleum-based. Do not use any brake fluid taken
from old, used or unsealed containers.
Never re-use brake fluid left over from the last
servicing or stored for a long period.
WARNING
Brake fluid, if it leaks, will interfere with safe run-
ning and immediately discolor painted surfaces.
Check the brake hoses and hose joints for cracks
and oil leakage before riding.
▣ ▣ BRAKE PAD WEAR
The extend of brake pad wear can be checked by
observing the grooved limit � on the pad. When the
wear exceeds the grooved limit, replace the pads
with new ones.
CAUTION
Replace the brake pad as a set, otherwise braking
performance will be adversely affected.
PERIODIC MAINTENANCE 2-18
CAUTION
Do not spill any brake fluid on the brake pad of
disk.
[ Front Brake ]
[ Rear Brake ]
�