Exhaust Pipe Nuts And Muffler Bolts - HYOSUNG MS3 250 Sercie Manual

CAUTION
� � Inspect the air cleaner element for tears. A torn
element must be replaced.
� � If driving under dusty conditions, clean the air
cleaner element more frequently. The surest
way to accelerate engine wear is to operate the
engine without the element or with torn ele-
ment. Make sure that the air cleaner element is
in good condition at all times. Life of the
engine depends largely on this component!
▣ ▣ OIL RETURN TANK DRAIN PLUG
Inspect the plug ①
and drain water and oil at the
periodic interval.
The oil return tank drain plug ①
the oil return tank.
EXHAUST PIPE NUTS AND MUF-
FLER BOLTS
Inspect Interval
Tighten Initial at 1,000 km and Every 4,000 km there-
after.
● Tighten the exhaust pipe nuts �, muffler connect-
ing bolt �, and muffler mounting bolts �, � to
the specified torque.
Exhaust pipe nut : 23 N∙ ∙ m (2.3 kgf∙ ∙ m)
Muffler connecting bolt
Muffler mounting bolt
: 18 ~ 28 N∙ ∙ m (1.8 ~ 2.8 kgf∙ ∙ m)
is located the side of
: 20 N∙ ∙ m (2.0 kgf∙ ∙ m)
PERIODIC MAINTENANCE 2-6
�
①
�