Dealer Mode - HYOSUNG MS3 250 Sercie Manual

◉ ◉ DEALER MODE
The defective function is memorized in the computer. Use the special tool's coupler to connect to the dealer mode
coupler. (Refer to page 4-14) The memorized malfunction code is displayed on LCD (DISPLAY) panel. Malfunction
means that the ECU does not receive signal from the devices. These affected devices are indicated in the code
form.
Mode select switch : 09900-27000
� � Do not disconnect the ECU lead wire couplers, before checking the malfunction code, or the malfunction
code memory is erased and the malfunction code can not be checked.
� � Confirm the malfunction code after turn the ignition switch "
seconds.
MALFUNCTION
"NO"
"YES"
�
�
�
�
CAUTION
LCD (DISPLAY)
INDICATION � �
Clock
C**code is indicated from
small numeral to large one.
FI SYSTEM DIAGNOSIS 4-10
"(ON) position or cranking the engine for few
INDICATION MODE � �
"FI" check lamp goes off.
"FI" check lamp comes on
continually.